murenmicroelectronics

LCD1602 yellow-green screen module, 16x2 character display, 5V powered with backlight. Widely used in industrial control and electronics projects. 

LCD1602 blue screen module, 16x2 character display, 5V powered with backlight. Widely used in industrial control and electronics projects. High contrast clear display. 

LCD1602 Keypad Shield, blue backlight 16x2 display, multi-button input & reset. Compatible with various boards. Suitable for electronics projects & industrial control.

Category：Lattice module 1. Don't connect VCC and GND reversely, so as not to burn out the chip 2.51 The P0 port of the single-chip microcomputer needs to be connected with a pull-up resistor. If your single-chip microcomputer is not connected with a pull-up resistor, you can connect the data line to other ports

Leuchtstarkes, entspiegeltes TFT-Display mit großer 1,77 Zoll BilddiagonalGroße Auflösung von 128x160 Pixeln zur klaren Darstellung von Texten, Grafiken und BildernHohe Hardwarekompatibilität mit Raspberry Pi & Co. dank Standard SPI-Datenschnittstelle und frei verfügbarer Bibliotheken für den ST7735 BildcontrollerMaße (LxBxH) – Board: 34 x 54 x 3,5* mm (ca. 12mm inkl. Pins); Display: 34 x 43 x 2,4 mm; Anzeigefläche: 28 x 35 

This set includes 120 connection cables, one third each with M2M, with F2M and with F2F connectors, and with a length of 20 cm each. This makes them long enough for any of your projects. Connect all your modules to the GPIOs of your Raspberry Pi breadboard easily and reliably with our jumper cables. This jumper wire cable set offers you plenty of flexible expansion options to your breadboard in the designs male to male, female to male and female to female. Our plug-in cables can be used with a 2.54 mm pitch and therefore compatible with all standard pin headers. They can be easily separated and hold securely and firmly in your socket or pin when used. Unlike Chinese competitors, a special copper mixture was used in our wire bridges, which is very resistant in contrast to the aluminium usually installed inside and is characterised by excellent conductivity. It is therefore also suitable for industrial / professional use, as our copper blend is characterised by extreme durability. This product contains an e-book that contains useful information about the beginning of your project, it helps with a quick setup and saves time in the configuration process. We offer a range of application examples, complete installation guides and libraries.

MR-006   100CMMR-014    200CMMR-019    30CMMR-037    50CM

A set of male to male jumper wire cable with plug for breadboards/breadboards. (3 x 65 pieces) Our jumper cables of different lengths (25 cm/20 cm/16 cm/12 cm) can also completely bridge large pegboards. breadboard is perfect for quick setup of electronic circuits with 400 contacts compatible with Raspberry Pi. breadboard kit is ideal for experimental setups in the laboratory, industry, university, schools, hobby sector and model building.